Product Menu ：
　  
　　
　		 In the internet world, the demand for office computerization has increased. 「 Kingnet 」 offers a convenient solution for the office environment. The low combustible nature of Kingnet also improves the safety of your workplace. Kingnet, the new generation network floor has
been developed to meet the demand of access flooring and a trend toward DIY installation. 「 Kingnet 」 also enable you to enjoy maximum freedom of cable planning while retaining the flexibility of changing your cabling layout. Kingnet saves installation cost and time.
 Features
1. New generation wide-duct design provides wider and flexible wiring space. Double-duct design to allow shorter cable distance and saving cable material cost. Universal size and transparent cover reduces installation time. Accommodate single or double outlets without the hassles of cutting.
　
2. Levaflor developed the unique “magnetic field separator” to build harmless and humanized office environment. Special metal strip divides the high and low voltage cables. Avoiding the magnetic field effect caused from the interlocking cables not only ensures health but also refrain computers from dumbness.
3. It\'s light work to adjust the floor level without any tools or professional skills. We specially design the level-adjusted cushion which has three types (2mm, 3mm and 4mm thickness) to extend the flexibility in adjusting level.
4. Each side of base panel provides an aperture which allows a bundle of cables to be run through.
5. The plastic link locks up the four-piece flooring module.
6. There is reserved duct for pop-out outlet on transparent covers which can be cut with handsaw. It\'s convenient to manage cable
7. There is no tension to install the Kingnet which floor finished height is only 5cm in the office with the lower ceiling.
8. The plastic ramp joins the cement floor to network floor to build a no-obstacle space where passengers can walk much safely.
9. You need not be worried about edging or filling gap because the edges trim can be cut for desired size.
 Easy DIY steps for 「 installing Kingnet network floor system 」

　

　 　 　 　
Clean the floor → Lay soft underlay → Mark out → Lay the Kingnet →
　 　 　 　
Lock up flooring with plastic link → Measure the edge size → Cut the edge trim for desired size → Lay the ramp →
　 　 　 　
Install cables → Install outlets → Lay carpet tile   Kingnet Network Floor System 　
　　 「 Kingnet 」 offers the full ranges of access flooring accessories to increase installation efficiency. Kingnet network floor and accessories provide a simple and efficient office floor system which adapts to modern offices automation needs.

Kingnet´s network floor and accessories are compatible with Matsushita´s plug and outlet system. Kingnet can even be installed by DIY.
　
 Accessories
*Please products below, and. click for inquiry.
Part No.
Picture Dimension
Select
Soft Underlay

Soft underlay avoids not only the damp appearance, but also the noise which is raised by rub between Kingnet network floor and cement floor.
Aluminum edge strip

Aluminum edge strip makes side edging steady and beautiful.
Power distributor and Connector

The various sockets and plugs which are produced by National/Matsushita Electric Works, Ltd. apply much to Kingnet network floor system and make wiring easier.
Double outlet (Hidden Type)

As you wish to change flexibly the types of sockets.
Single Outlet (Hidden Type)

As you wish to change flexibly the types of sockets
Pop-out outlet

Under using, only press the on-off. After using, only push the cover.
Outlet base

Outlet base applies to the sockets and makes the sockets steady.
Extension Outlet

Extension Outlet applies to power distributor, power connector, even and single/double outlet to provide  the convenience of more power supplies.
　 　
LEVAFLOR INC.
Room 3. 7F , No. 127, Keelung Rd., Section 1, Taipei, Taiwan
Tel: 866-2-27618640   Fax: 886-2-27610194
E-Mail : levaflor@ms24.hinet.net